Sulphuric acid, also known as Hydrogen Sulphate, is classified as diprotic acid and strong acid with chemical formula H2SO4. The physical properties of sulphuric acid Is colorless to slightly yellow liquid. It was known as oil of vitriol. Sulphuric acid is very soluble in water in every concentration. Sulphuric acid does not occurs in nature in anhydrous form because of it hygroscopic properties, which can absorb water vapor from the air. Sulphuric acid formed in nature by oxidation reaction of sulfide minerals.
Manufacturing process of sulphuric acid using Chamber process only produced approximately 65% concentration. There are several method of manufacturing sulphuric acid:
1. Contact Process
This is the most common manufacturing process in industry, because the sulphuric acids that obtain from this process are in high concentration and also less expensive that other method. Contact process also used for fuming sulphuric acid from sulphur dioxide. This process is occurs by roasting sulphide ores or burning sulphur with oxygen in the presence of vanadium (V) oxide catalyst and classified as exothermic reaction. This method comprises four steps:
i. Producing sulphur dioxide by burning sulphur
S(s) + O2(g) = SO2(g)
ii. Oxidation reaction of sulphur dioxide to produce sulphur trioxide
2SO2(g) + O2(g) = 2SO3(g) (V2O5 Catalyst)
iii. Absorpsion of sulphur trioxide into H2SO4 (97-98 %) to produce oleum (H2S2O7(l))
H2SO4(l) + SO3(g) = H2S2O7(l)
iv. Dilution of oleum with water to produce sulphuric acid in certain concentration
H2S2O7(l) + H2O(l) = 2H2SO4(l)
2. Wet Sulphuric Acid Process (WSA Process)
WSA process is largely used in industry for recovering sulphur. There are 4 main reactions in WSA process, which is combustion, oxidation, hydration, and condensation. WSA process is classified as an exothermic reaction and the heat released by the reaction is used for production of steam. The process of making sulphuric acid using WSA process in the presence of vanadium (V) oxide catalyst is shown below:
i. Combustion: H2S + ½ O2 = H2O + SO2
ii. Oxidation: 2SO2(g) + O2(g) = 2SO3(g) (V2O5 Catalyst)
iii. Hydration: SO3 + H2O = H2SO4(g)
iv. Condensation: H2SO4(g) = H2SO4(l)
3. Metabisulfite Method
This method is using sodium metabisulfite or potassium metabisulfite as main material for producing sulphuric acid. Metabisulfide is added with hydrochloric acid with concentration of 12.6 molar and produce sulphur dioxide. This production of sulfur dioxide is easier than burning sulphur. Then sulphur dioxide is converted to sulfuric acid by reacting it in water that contains oxidizer such as nitric acid or hydrogen peroxide. The reaction is shown below:
SO2 + H2O2 = H2SO4
Sulfuric acid has a broad range of applications, involving manufacture of fertilizers, pigments, dyes, drugs, explosives, detergents, and inorganic salts and acids. The major use is in the manufacture of fertilizer to improve plant growth. It is also used as important chemical compound to produce popular acids like Nitric Acid and Hydrochloric and used as a catalyst to refine oil.
Each year, about 30% of sulphuric acid production is used to make fertilizer. It is used in fertilizer like ammonium sulphate and super phosphate of lime as dehydrating agent so the ground will not be overhydrated and too saturated. Phosphoric acid that contains in super phosphate fertilizer is produced from reaction of sulphuric acid with phosphate rock. Ammonia, in the form of gas is react with sulphuric acid to produce ammonium sulphate fertilizer and easily absorbed by plant roots. It is also used in fertilizer as nutritive values and improves fertilizer efficiency.
Sulfuric acid is often used as a dehydrating agent when manufacturing dyes, detergents and explosive devices. It effectively draws out condensation and moisture from a diverse range of substances. For example, when sulfuric acid is poured on sugar crystals, the compound removes 11 molecules of water for every molecule of sucrose, leaving a spongy, brittle mass of carbon. The drying properties of sulfuric acid make it corrosive and cause burns on the skin.
Electronic and automotive Industry
Sulphuric acid is used in lead-acid batteries for cars and other vehicles. Sulphuric acid is usually mixed with water to create chemical reaction that produce electron to make the charge that needed to start vehicle. The electron also circulates through the cathode to allow a safe method for removal of the used electron, because the electron charge cannot be used again by the battery.
Waste water treatment Industry
For wastewater treatment, sulphuric acid is used to remove impurities from various substances. Sulphuric acid is used to neutralize the water that contaminate from basic substance and also use to break emulsions. It also used in drinking water treatment to create an improved taste and remove impurities. It also used as raw material in the production of another wastewater treatment compound such as aluminium sulphate.
In oil refinery, sulphuric acid is used as catalyst in production of isooctane. In steel industry, sulphuric acid is used to remove rust and oxidation. Because of its strong acidic properties, sulphuric acid is used as pH neutralization for certain strong basic solution such as sodium hydroxide, calcium carbonate, or lime suspension. The neutralization reaction can rise the temperature. In pulp industry, sulphuric acid is use as pH regulator when recovering pulp chemicals and to produce chlorine dioxide for bleaching.
Tradeasia is fulfilling the needs of many international and national companies by offering premium quality chemicals, which are prepared by professionals. We are a leading Sulphuric Acid Supplier that serve the purpose of many of our clients, at budget-friendly rates. Paired up with our comprehensive supply capability, We are one of the best Sulphuric Acid Suppliers based in South East Asia. Tradeasia International tends to make sure that the desired product is delivered within the given time frame without compromising on the quality at all.
Driven by the idea of providing top-quality Sulphuric Acid for our customers, we at Tradeasia International aim to organize and offer top-notch Sulphuric acid that widely used in several industries for different purposes such as:
Industrial production of chemicals such as phosphoric acid (In fertilizer), Ammonium sulfate (In nitrogen fertilizer), aluminum sulfate (In paper making), aluminum hydroxide ( In water treatment).
Industrial cleaning agent in the steel-making industry, automobile industry, microelectronics industry, dyestuffs production.
As a catalyst in several chemicals process which is responsible for nylon, hydrochloric acid, petroleum refining.
pH regulators in the pulp industry
As pigments in paints, printing inks, coated fabrics, and paper industry
Domestically as acidic drain cleanser
Works as an electrolyte in lead-acid Battery production.