Article
12 January 2026
Pulp and Paper
Polyacrylamide has become one of the most important process chemicals in the modern pulp and paper industry. As mills face rising fiber costs, increasing recycled content, tighter water regulations, and pressure to improve machine efficiency, advanced wet-end chemistry plays a central role in maintaining competitiveness. Among these solutions, polyacrylamide, commonly referred to as PAM, stands out for its versatility and measurable impact on productivity and quality.
Polyacrylamide is widely used in papermaking as a retention aid, drainage enhancer, and flocculant. Its ability to improve fiber and filler retention, accelerate dewatering, and support effective wastewater treatment makes it indispensable across many paper grades. For mill managers, process engineers, and procurement teams, understanding how polyacrylamide works and how to select the right grade is essential for both operational performance and cost control.
This article provides a comprehensive overview of polyacrylamide for the pulp and paper industry, covering its chemistry, functional roles, ionic types, application considerations, environmental profile, and market outlook.
In the wet end of the paper machine, polyacrylamide functions as a retention aid by binding fibers, fines, and fillers into the forming sheet. Through a combination of electrostatic attraction and polymer bridging, PAM reduces material losses to the white water system and improves overall furnish efficiency.
Polyacrylamide also enhances drainage by promoting controlled flocculation, allowing water to drain more rapidly through the forming wire. Improved drainage supports higher machine speeds, reduces energy consumption in the press and dryer sections, and improves sheet formation stability. These benefits are particularly valuable in packaging, board, and recycled fiber grades.
Beyond the paper machine, polyacrylamide plays a vital role in mill water management. In wastewater treatment systems, PAM acts as a flocculant that aggregates suspended solids, fines, and biological sludge into dense flocs that settle or dewater efficiently.
This improves clarification performance, reduces sludge volume, and enables greater water reuse. As water discharge limits become stricter worldwide, polyacrylamide remains a key tool for environmental compliance and cost-effective effluent treatment.
Selecting the correct polyacrylamide type is essential for achieving optimal results in papermaking.
Cationic polyacrylamide carries a positive charge, making it highly effective in systems where fibers and fillers have negatively charged surfaces. CPAM is the most widely used PAM type in the pulp and paper industry.
It is commonly applied as a retention and drainage aid in alkaline systems, recycled fiber furnishes, and high-filler applications. CPAM also contributes to improved sheet strength and formation when properly dosed.
Anionic polyacrylamide has a negative charge and is often used in combination with inorganic coagulants such as alum or polyaluminum chloride. In these dual-polymer systems, APAM provides strong bridging action that enhances floc size and drainage.
APAM is frequently used in wastewater treatment and clarification systems, as well as in selected wet-end applications under neutral or acidic conditions.
Nonionic polyacrylamide has minimal charge interaction and relies primarily on physical bridging. It is applied in specialty situations where charge balance is critical or where pH conditions fluctuate significantly. NPAM is less common in mainstream papermaking but remains valuable in niche applications.
When correctly selected and applied, polyacrylamide delivers significant operational and economic benefits:
Improved retention reduces losses of fiber, fillers, and functional additives
Enhanced drainage supports higher machine speeds and lower energy use
Better runnability leads to fewer sheet breaks and more stable production
Improved wastewater treatment reduces effluent load and disposal costs
From a sustainability perspective, polyacrylamide enables higher recycled fiber usage, improved water recycling, and lower freshwater consumption, supporting circular economy objectives.
Polyacrylamide is considered low risk when used and handled properly. Commercial grades are tightly controlled to ensure residual acrylamide monomer levels remain within regulatory limits, typically below 0.05 percent.
In pulp and paper applications, PAM contributes positively to environmental performance by improving solids removal and wastewater treatment efficiency. Safe handling practices include proper dust control for dry products, use of personal protective equipment during solution preparation, and compliance with applicable environmental regulations.
Not all polyacrylamide products perform the same. Paper mills benefit from working with suppliers that offer consistent quality, application expertise, and technical support. Key evaluation criteria include molecular weight distribution, charge density control, dissolution behavior, and long-term supply reliability.
Partnering with experienced distributors such as Chemtradeasia allows pulp and paper manufacturers to access tailored polyacrylamide solutions, technical guidance, and reliable regional supply. This ensures optimal performance across different paper grades while supporting cost and process stability.
Polyacrylamide is a foundational chemical in modern papermaking, supporting efficiency, quality, and sustainability across the entire pulp and paper value chain. Its roles in retention, drainage, and wastewater treatment make it indispensable for mills operating under increasing economic and environmental pressure.
As the industry moves toward higher recycled content, tighter water systems, and greater cost optimization, strategic use of advanced polyacrylamide chemistry will only become more important. Selecting the right PAM type and working with knowledgeable partners such as Chemtradeasia enables paper producers to improve performance today while preparing for the demands of tomorrow.
We're committed to your privacy. Tradeasia uses the information you provide to us to contact you about our relevant content, products, and services. For more information, check out our privacy policy.
Leave a Comment